Directions to East Hills, Port Washington, and Hauppage

Pall Corporation Pall Corporation Pall RAI Manufacturing Co.
(Headquarters) (Training & Technical Ctr.) 225 Marcus Boulevard
2200 Northern Blvd. 25 Harbor Park Drive, North Hauppauge, NY 11788-3799
East Hills, NY 11548-9834 Port Washington, NY 11050-4630 (631) 271-0911
(516) 484-5400 (516) 484-3600

 

FROM NEW YORK CITY...

Uptown:
Triboro Bridge (125th Street) to Grand Central Parkway to Northern State Parkway eastbound.
(Follow appropriate directions to facility)

Midtown:
Queens-Midtown Tunnel (34th Street) to LIE 495 eastbound.
(Follow appropriate directions to facility)

Downtown:
Queensborough (59th Street) Bridge to Queens Blvd. (25 east) to LIE 495 eastbound.
(Follow appropriate directions to facility)

FROM AIRPORTS...

MacArthur Airport:
Take Vets Highway (Route 454) west to Northern State Parkway westbound (after the merge w/ Route 347)
OR:
Take Vets Highway (Route 454) west LIE 495 westbound.
(Follow appropriate directions to facility)

LaGuardia Airport:
Take Grand Central Parkway (GCP) eastbound – it becomes Northern State Parkway eastbound.
(Follow appropriate directions to facility)

JFK Int'l Airport:
Take the Van Wyck Expressway (Route 678) and head north to LIE eastbound (495E).
(Follow appropriate directions to facility)

Newark Airport:
New Jersey Turnpike to 95N. Get off at Exit 16 to Lincoln Tunnel NYC. Go cross-town Manhattan via 34th St. and follow signs to Queens-Midtown Tunnel. After toll take LIE 495 eastbound.
(Follow appropriate directions to facility)

Directions to East Hills

From LIE (495):
Take Exit 39N, Glen Cove Road.
(Follow appropriate directions to facility)

From the Northern State Parkway:
Traveling west-bound: Take Exit 31A, Glen Cove Road.
(Follow appropriate directions to facility)
OR:
Traveling east-bound: Take Exit 29N, Roslyn Road north to 1st light. Make a right. Stay on service road to Glen Cove Road. Make a left onto Glen Cove Road.
(Follow appropriate directions to facility)

To East Hills:
Take Glen Cove Road north, make a left onto Northern Boulevard (Route 25A). Go two lights.
(Pall building is on the left)

Directions to Port Washington

From the LIE (495):
Eastbound, take exit 37 north (Willis Ave.).  Make left onto Mineola Avenue and proceed north.

Westbound, take exit 37north.  Make right onto Mineola Avenue and proceed north.

From Mineola Avenue, make a right onto Old Northern Boulevard.  Make a left onto West Shore Road.  At the second light make a left onto Harbor Park Drive North.  Pall Technical Center is the first building on the left.

From the Northern State Parkway:
Take exit 29N, Roslyn Road, proceed north for several miles and bear to the left at the Clock Tower onto Main Street/West Shore Road.  Make left at third light onto Harbor Park Drive North.  Pall Technical Center is the first building on the left.

Directions to Port Washington from East Hills

Make a left onto Northern Boulevard, right at first exit before viaduct, left onto Bryant Avenue. At second light, make a right onto Old Northern Boulevard, proceed through town and bear right at Clock Tower onto Main Street/West Shore Road. Make a left at third light onto Harbor Park Drive, North.
(Pall Technical Center is the first building on the left)

Directions to Hauppauge

From the LIE:
Take the LIE 495 east to Exit 55 and head north on Vanderbilt Motor Parkway about ½ mile. At the third light, make a right onto Marcus Boulevard.
(Pall is the last building on the right)

From the Northern State Parkway:
Take eastbound to Exit 46, New Highway – go to stop sign. Continue one block after stop sign and make a right on Oser Avenue. At 2nd traffic light make a right onto Marcus Boulevard.
(Pall is immediately on the left)

Print  Close